

                 High-Speed CD-ROM Drive README File

This README file contains the newest information that is not shown in the
User's Manual.  Please read the following comments carefully before starting
installation:



1. Release Note:

   A. There are two kinds of installation types: Easy Install and
      Custom Install.

   B. Easy Install relies on installation program to make decision, so
      installing Device Driver is quick and easy.

   C. Custom Install is for computer users who want to have more control
      over how Device Driver is installed.

   D. DMA Bus Master transfer mode is supported by appending a software
      option /DMA to command line of device driver in CONFIG.SYS, ex.,
      DEVICE = C:\HXCD-ROM\LTNIDE.SYS /D:MSCD000 /DMA
      NOTE: This DMA mode and PIO mode 3 can only work on PC or PC-compatibles
            with Intel Triton chipset employed. It may not work in other
            PC systems.

   E. The command line "LASTDRIVE=" will be added into CONFIG.SYS 
      automatically after installation.

   F. PIO mode 3 for SIS 5513 PCI chipset is supported currently.


2. Troubleshooting:

   (I)   SMARTDRV.EXE(or SMARTDRV.SYS) should be hooked before MSCDEX.EXE
         for proper caching.

   (II)  If there are two CD-ROM drives in your PC, only one Device Driver
         (LTNIDE.SYS or others) and MSCDEX.EXE is necessary.

   (III) Please check the Appendix B. Troubleshooting of User's Manual for
         details.

   (IV)  Ask your local dealers for help.

